Brake Fluid Tester DOT3/DOT4

Brake Fluid Tester DOT3/DOT4

$7.64 $15.77 Save $8

HURRY! ONLY 15 LEFT IN STOCK!

Hours Minutes Seconds

Sale Ends Once The timer Hits Zero!

Tester Specification:

1. To check the quality of brake fluid quality

2. 5 LEDs to indicate percentage of water in the brake fluid

3. Automatically power off

4. Operated by a LR03 AAA 1.5V battery.

 

Indicator Instruction:

1.5 LEDs indicating the water % in the brake fluid:

2.0% light indicates that the battery is OK, no replacement

3.1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use.

4.2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use

5.3% light indicates that moisture content of brake oil less than 3% , proposed to replace brake fluid.

6.4% light indicates that moisture content of brake oil less than 4%, brake fluid should be replaced immediately.

7.Note: Due to the difference between different monitors, the picture may not reflect the actual Color of the item. Thanks for your understanding.

 

Operation Guideline: 

1. Unscrew the brake fluid reservoir and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device.

 

2. Press the button for power on, green LED will light up. Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs, Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity.

34

 

Real time Visitor right now